Candy CSE C10LF 10KG

Home › Forums › Public Support Forums › Help And Support › Tumble Dryer Help Forum › Candy CSE C10LF 10KG

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • January 13, 2023 at 5:37 pm #101599
    Shroppyfly
    Participant

    Hi Experts,
    My last lazy start query im living with lol, but here’s another thing I’m stuck with, i had the above dryer, and i’ve had it that long i can’t actually remember what was wrong with it, except to say im really struggling to refit a belt to it— And i know that’s an easy problem BTW the dryer worked A1 before i thought changing the belt would be a good idea , and yes id agree usually but heh , hands like shovels,
    Anyway today I was gifted the identical dryer, whether by luck , or someones taunting me, the guy said its stuck on pause, so he’d read its the door interlock, so he replaced it , but still the start/pause button flashing, So I thought ahaaaa, ill swop over the top panel with buttons and board and happy days,Mmmm so i swapped them over and ( i know this panels fine ) still the same fault:confused::confused::confused:,
    So, a hard question? where should i look for the fault, stats or start capacitor??? or is there a test/service programme for this model

    Thanks guys and lady experts
    James

    January 14, 2023 at 12:16 am #485358
    electrofix
    Moderator

    if the start capacitor has gone then it should not stay on pause and giving the drum a push should make it run

    Dave

    January 14, 2023 at 6:54 am #485359
    kaibart
    Moderator

    Maybe the facia panel as the touch control goes through that

    January 14, 2023 at 7:46 am #485360
    Shroppyfly
    Participant

    electrofix wrote: if the start capacitor has gone then it should not stay on pause and giving the drum a push should make it run

    Dave

    Dave id agree, esp as Ive swopped the complete front panel for one I KNOW is good, so by pressing the start” touch button” that should go green and then give the drum a helping spin , but Nowtttt……., these capacitors are a pain, does the helping hand method only work when the capacitor is Fail— ing IE on its way out, if it completely dead– would the helping hand method still work? I mean what would happen if the capacitor wasn’t connected up , then the light wouldn’t go green OR would it, and the helping spin of the drum wouldn’t work , am i understanding it correctly ?

    Thanks

    January 14, 2023 at 7:47 am #485361
    Shroppyfly
    Participant

    kaibart wrote:Maybe the facia panel as the touch control goes through that

    Thanks Kai , but ive changed the Fascia panel for one I KNOW is good

    January 14, 2023 at 8:46 am #485362
    Shroppyfly
    Participant

    So 8-40 am, after wiggling all the electrical connectors and swearing a bit , its fired up, so just letting it run to test the heater and condenser, will give another update later , im semi happy

    January 21, 2023 at 6:19 pm #485363
    Shroppyfly
    Participant

    Final update, that seems to have done trick cheers kai

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.