BEKO washing machine WTB941R2W – stops on rinse

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › BEKO washing machine WTB941R2W – stops on rinse

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • March 7, 2023 at 8:09 pm #101776
    asp11
    Participant

    This machine works fine on heat/wash then it empties the dirty water, fills a little, spins a little (with red wash light on)
    Then it fills for a few seconds, the red light changes to rinse….. and then it stops and is silent….

    If you stop it, turn to spin/empty it’ll work fine – there’s no buzzing from the valve when it stops after changing to the rinse light….. just silence!
    I’m thinking control board but thought I’d ask on here first

    Thanks for any help?

    Pnc = 7145641800

    March 7, 2023 at 8:14 pm #486007
    matrixresonator
    Participant

    Ive had this a couple of times, been a dead rinse valve both times.

    March 8, 2023 at 4:14 pm #486008
    asp11
    Participant

    matrixresonator wrote:Ive had this a couple of times, been a dead rinse valve both times.

    That does sound logical but why can I hear a small squirt of water intake before it goes silent?

    March 8, 2023 at 5:00 pm #486009
    matrixresonator
    Participant

    What I did was check for voltage at the valves, also on fill swap the connectors over and the rinse valve should fire up to show if its working or not.

    March 8, 2023 at 6:06 pm #486010
    electrofix
    Moderator

    have sent you the service manual to hotmail acct

    Dave

    March 9, 2023 at 4:55 pm #486011
    asp11
    Participant

    electrofix wrote:have sent you the service manual to hotmail acct

    Dave

    THANKS Dave

    March 17, 2023 at 5:06 pm #486012
    asp11
    Participant

    matrixresonator wrote:What I did was check for voltage at the valves, also on fill swap the connectors over and the rinse valve should fire up to show if its working or not.

    Just to confirm = the valve fixed the problem, so THANKS to you both for your help

    March 17, 2023 at 5:15 pm #486013
    matrixresonator
    Participant

    Glad to hear you’re sorted

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.