- This topic has 8 replies, 2 voices, and was last updated 2 years, 11 months ago by
.
-
Posts
-
My 5ish year old Electrolux ESL5201LO has developed an intermittent issue. The drying cycle doesn’t seem to work properly but this doesn’t happen all the time. I’ve opened the door during the wash and the water was warm. This comes after another intermittent issue which hasn’t re-occurred for a good while, it seemed to be getting ‘stuck’ on the wash cycle for hours on end. Like I say though, that doesn’t seem to be happening any more but the drying issue crops up fairly often, it’s pretty much cold end in there when you open the door at the end of the cycle as opposed to the clouds of steam when it’s working properly.
Any ideas please?Thanks Dave, There’s current to it sometimes – that’s the problem. It’s an intermittent issue. I don’t know how I can “advance” the cycle to the dry stage when it’s playing up and see if there’s current then.
forget what i said, I have deleted it. somehow i had washing machine in my head
ok you said its warm sometimes, is it plumbed into hot water which could give the impression its heating
Daveintermittant faults are hard to find and thats your biggest problem
I think if it was me i would start by replacing the motor tacho coil. this is not a part electrolux supply but the coil off a beko washing machine fits ok. this coil detects to see if the motor is turning and wont turn on the heater unless it does. its a common no heat failure if the element is ok
do a google search for 372205505
Dave
no dishwasher motors have a tacho
look here
Dave
- You must be logged in to reply to this topic.