AEG Heater only the TOC required.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › AEG Heater only the TOC required.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • July 15, 2023 at 11:20 am #102104
    RocketMan
    Participant

    Ref heater 8581366110329. It’s for a 91609675201/T65270AC condenser dryer

    I’m after the TOC for this heater. I see it’s only available as a complete heater. Not sure what temperature the TOC is sorry.
    Diagnosed remotely as it’s way out of my area but going to do the job as a favour to someone I know.
    I talked them through the test mode and accessed the correct fault code E63.
    Cleared fault code and after running the dryer, it faults and the E63 is again accessed from test mode.

    It could be the heater as he’s just moved but if it’s just the TOC that would be a better option. I will of course go armed with a full heater as well.

    TIA

    July 15, 2023 at 11:48 am #487591
    electrofix
    Moderator

    toc is rivetted to the mica. the chances of drilling steel rivet off mica are close to zero and then try getting rivets back

    you cant buy the stat, complete heater only

    but beware there is a service bulletin about fitting the heater and fitting will need email to send it to you if you want


    Dave

    July 17, 2023 at 8:38 am #487592
    RocketMan
    Participant

    Dave,

    As every, you’re a top man.

    Rivetted TOC. Another step close to making thngs even more difficult and costly to repair.
    Please, if you don’t mind to the TB. If you could email me that would be great. Might need it for my own AEG dryer.

    Right,now to find a reasonably priced heater… 🙁

    July 17, 2023 at 9:11 am #487593
    electrofix
    Moderator

    no probs

    thought i had your email but cant find it

    let me have it again


    Dave

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.