- This topic has 8 replies, 3 voices, and was last updated 2 years, 7 months ago by
.
-
Posts
-
Hi all
Prod: 7632253842
Can someone send me the service info for this machine please, it refuses to heat or open the tablet dispenser but all the wiring and element checks out as good, the NTC was also giving a believable reading (though I don’t know what the correct value should be) so I tried replacing the module but that didn’t cure it.
I have got an NTC on order to compare with the existing one but would like to be able to access service and test modes if possible.
Thank you
Jem
I have one of these which beeps when you close the door and registers a program but nothing starts I have checked all componants but they seem all ok. Any help would be much appreciated
have you checked door wires for breaks ?
would expect pump to run first assume its not jammed
have emailed a few files
Dave
Thanks for the info Dave. No breaks in the door wires just beeps to start then nothing. No pump as you would expect
Andy
see if the self test will work
after that sounds like it may be the board
have you opened the board and checked for damage ?
Dave
- You must be logged in to reply to this topic.