Hotpoint tumble dryer f14 error

Home › Forums › Trade Technical & Spare Parts Forums › Hotpoint tumble dryer f14 error

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 25, 2023 at 7:02 am #102192
    dunston
    Participant

    Hotpoint AQC9BF5E-Z1 will heat for about 5 minutes then all the lights start to flash and displays a F14 error.
    The drum continue to turns – stops heating.
    Anyone had this fault?

    August 25, 2023 at 7:36 am #487893
    electrofix
    Moderator

    Not seen it myself. Can probably look it up but away till Monday.
    if you get no reply’s add a reminder Monday so when I log in from home I can see if I have any info

    Dave

    August 25, 2023 at 8:17 am #487894
    Hollytree_Technical
    Participant

    According to a service manual for a similar machine:

    F14: Rear NTC Over Heating

    Check the Cycling Thermostat is operating correctly.
    Check the Machines Filter is Clean.
    Check the machines air flow for blockages.
    Check the machines Plinth and air vents are not obstructed or blocked.
    Check the NTC and attached Circuit and Connections.

    Jem

    August 31, 2023 at 7:09 am #487895
    dunston
    Participant

    Thanks for your help but the customer hates the dryer and has bought a new one.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.