John Lewis washer dryer 914600609/00

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › John Lewis washer dryer 914600609/00

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • August 31, 2023 at 7:22 am #102200
    dunston
    Participant

    This washer dryer will randomly trip the electric.
    I can detect a earth fault then it disappears.
    Ive disconnected the wash element and dryer element – starts washing and trip after 5 minutes
    Reset the trip and it starts to wash OK then trips again after a few minutes
    Its not the mains filter and ive replaced the 13amp plug
    The motor is a induction type – I have not disconnect the motor
    Any help would be apprieated

    August 31, 2023 at 9:14 am #487919
    electrofix
    Moderator

    have you tried a different socket

    sparking in the socket can cause tripping

    Dave

    August 31, 2023 at 4:41 pm #487920
    dunston
    Participant

    Yes tried a different socket in a different room via a extension lead

    August 31, 2023 at 8:13 pm #487921
    electrofix
    Moderator

    have you had a close look at the harness

    Dave

    September 1, 2023 at 4:59 am #487922
    Kentish
    Participant

    Dryer elements or the dryer TOC are what I usually find causing tripping with Zanussi based washer dryers.
    so much so, I carry both parts now.

    September 2, 2023 at 9:06 am #487923
    dunston
    Participant

    Thanks. I’ll check the harness and TOC

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.