Bosch Dishwasher SPV40C10GB/32 FD: 9511

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Bosch Dishwasher SPV40C10GB/32 FD: 9511

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • September 3, 2023 at 12:45 am #102212
    DIYer
    Participant

    Hello I used my Bosch integrated dishwasher twice yesterday. I went to use it again and the tap symbol came on. I have cleaned the inlet filter, checked to see the hose is not kinked but nothing seems to work. Any ideas please?

    September 3, 2023 at 9:58 am #487952
    electrofix
    Moderator

    is the tap symbol just on or flashing

    Dave

    September 3, 2023 at 4:00 pm #487953
    DIYer
    Participant

    It is flashing quite rapidly and intermittently beeping

    September 3, 2023 at 5:10 pm #487954
    electrofix
    Moderator

    in that case its not a water fault

    from memory if its a steady light its water or drain

    if its flashing it can be anything else

    check the owners manual to confirm

    Dave

    September 3, 2023 at 6:40 pm #487955
    DIYer
    Participant

    Thanks. The drain pump use to run even when the machine was off. I fixed that several times but I think the machine has probably given up after 7 years if this is a new error.

    September 5, 2023 at 9:04 pm #487956
    kaibart
    Moderator

    It’s a leak into the base of the dishwasher you need to dry the base run the dishwasher and identify where it’s leaking from

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.