Smeg DF612 service manual.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Smeg DF612 service manual.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • September 22, 2023 at 3:46 pm #102254
    aqua_serve
    Participant

    Hi all,

    Would any of you guys and girls happen to have a service manual for this machine?

    Mark

    September 22, 2023 at 9:46 pm #488102
    electrofix
    Moderator

    check the model it should have letters after the numbers

    Dave

    September 23, 2023 at 7:04 am #488103
    aqua_serve
    Participant

    electrofix wrote: check the model it should have letters after the numbers

    Dave

    Hi Dave, it’s a DF612 SE.

    Mark

    September 23, 2023 at 8:47 am #488104
    kaibart
    Moderator

    What’s wrong with it ?

    September 23, 2023 at 9:24 am #488105
    electrofix
    Moderator

    have emailed you a few things

    if its the early type of programmer a known fault is the power supply cap on the board
    machine will run till heater cuts in when board will crash and programme starts again

    Dave

    September 24, 2023 at 7:30 am #488106
    aqua_serve
    Participant

    Cheers Dave,

    I really appreciate you sending the service manual. I was hoping that it’d have electrical diagrams including the layout of the PCB.

    I’ve got a customer who tried a DIY repair by replacing a blown board. The live/neutral connector had melted and the board was destroyed. He didn’t take a picture of which way round they were inserted into the board and threw the melted plug away. I’m off to refit the new PCB he has bought but wanted to be sure I got the wiring correct when I fit spade connectors to them.

    September 24, 2023 at 11:54 am #488107
    electrofix
    Moderator

    hopefully your wish has been granted

    Check email again

    Dave

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.