- This topic has 2 replies, 2 voices, and was last updated 2 years, 3 months ago by
.
Viewing 3 posts - 1 through 3 (of 3 total)
-
Posts
-
Samsung washing machine WW90K76510W
Called after machine stopped mid cycle full of water.
Spin cycle completes program but doesn’t energise drain pump. Drain pump not open circuit.
Wash prog shows C4 error after a couple of minutes indicating water supply fault. Water Supply and valve fine, not energised from module.
heating element is fine.
Anything I haven’t considered before replacing expensive module, thanks.have you had a good look at the pump to make sure its not blown the board
have a careful look at the board and see if you can see any damage. look around where the pump and valve wire is plugged in
Dave
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.