Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Hoover HWBOS69TAMCET-80 fill hose
- This topic has 10 replies, 2 voices, and was last updated 2 years ago by
washingmachinewoman.
-
AuthorPosts
-
March 25, 2024 at 8:14 pm #102674
washingmachinewoman
ParticipantThis is machine id 31800973
It had two fill hoses fitted to the bottom of the detergent dispenser, one goes to the tub, the other to the side of the door seal.
The latter hose has sprung a leak, but I can’t find it listed. The exploded diagram on ASWO is a generic one. All I can find is the other fill hose and the sump hose. There are parts on http://www.hooverspares.co.uk (one of the many Connect sites) whose descriptions include fill hose but none of them are pictured or in stock.Anyone got the correct exploded diagram and parts list?
March 25, 2024 at 10:01 pm #489981electrofix
Moderatorthe hoover spares site seems to be down at the moment
will try to think on to check later
if i dont get back post a reminder
Dave
March 25, 2024 at 10:23 pm #489982washingmachinewoman
ParticipantThanks Dave, will try to remember myself!!
In the meantime, have sent a request on ASWO. There is also someone breaking this model on eBay, I’ve asked if they have the hoses.
March 26, 2024 at 10:06 am #489983electrofix
Moderatorok try this
seems to be a lot of hoses
Dave
March 26, 2024 at 10:09 am #489984electrofix
Moderatorok have emailed you the parts diagrams and the above screen dump
if you need a part no not listed let me know
Dave
March 26, 2024 at 2:10 pm #489985washingmachinewoman
ParticipantThanks Dave, got them.
It doesn’t look a bit like that machine I went to unfortunately!! And these are the diagrams that ASWO also have…

Wondering if there are several entries under part position 273?
Lucie
March 26, 2024 at 7:03 pm #489986electrofix
Moderatorpart diagrams on hoover are not very helpful somtimes
on this one some hoses change with serial as well
Dave
March 27, 2024 at 9:41 am #489987washingmachinewoman
ParticipantBingo!
Thanks so much, Dave.
The serial number of the machine starts with 2206, so there are two fill pipes i.e. 273 and 273a, the part I am after is 43036963. Not in stock at ASWO though… but I’ll keep looking.
I don’t often think or say this, but ASWO has been most unhelpful this time around. Presumably they have access to the hoover site like you, and I gave them the serial number, but no, they wanted a picture of the rating plate and of the original part. Obviously I couldn’t do that as I have made a temp repair to the machine and didn’t take the part off.
March 27, 2024 at 9:51 am #489988electrofix
ModeratorAswo has the same problems little or no info to help you identify part from hoover
Dave
March 27, 2024 at 10:04 am #489989electrofix
ModeratorHi Lucie
found a tech doc on the inlet system that may make things a bit clearer
have emailed it to you
Dave
March 27, 2024 at 1:22 pm #489990washingmachinewoman
ParticipantThanks Dave, most edifying.:)
-
AuthorPosts
- You must be logged in to reply to this topic.
