Washing machine door inside trip loose

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Washing machine door inside trip loose

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • May 4, 2024 at 5:57 pm #102739
    Balr
    Participant

    I have a issue with the washing machine door. The model is a Siemens WM12Q362GB/09, on the inside trim that surrounds the glass this is coming away from the hinge side. I thought the trim would be held by screws but not seems to be some white rivet style fixings that cannot be removed and these seem to be missing that side. Is this a case of replacing the whole door ?


    thanks

    May 4, 2024 at 6:18 pm #490290
    electrofix
    Moderator

    yes its a complete door
    but if its only the head of the rivet that off the stud has a hole in the middle. find the right size self tapper and you can sometimes fix it

    Dave

    May 4, 2024 at 6:41 pm #490291
    Balr
    Participant

    Looking though one of holes where the stud has snapped off, it does look like its snapped from the base of it.

    May 4, 2024 at 9:09 pm #490292
    electrofix
    Moderator

    well in that case nuts and bolts are your only option as siemans want £145 for a door

    you could also try ebay for a used one

    Dave

    May 5, 2024 at 8:50 am #490293
    bammec
    Participant

    I’d be tempted to try some epoxy resin on the door first. For the sake of a couple quid, it’s worth a try.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.