- This topic has 7 replies, 2 voices, and was last updated 1 year, 9 months ago by
.
-
Posts
-
Hotpoint NM10644WWUK washing machine IC 7699915556510. The machine fill for a few seconds and a red spanner symbol flashes in the display and machine stops. i had previously fitted a door seal and interlock to the machine. the red spanner came on then. i switched the machine off then back on and the machine has worked ok for a week. Anyone have any ideas what fault the spanner issue is? or how to run a diagnostic on this model. I can’t seem to find any info on this model.
Thanks Markit did the same, after about 10 seconds the spanner icon comes on and machine stops. i checked the filter for blockages.
ok did the motor turn at all ?
am looking for things it is doing wrong or not doing as a poss clue
was wondering if it was a water fill error but since this does not happen on spin then thats out
now thinking motor problem
Dave
i have a feeling the spanner icon is saying there is a fault and i will have to run a diagnostic test to show the error code.
from what i can see you have to have a plug in diagnostic tool making anyone’s job who does not have one harder
lost access to Hotpoint tech after whirlpool takeover so cant get info as easily
Dave
- You must be logged in to reply to this topic.