- This topic has 3 replies, 3 voices, and was last updated 1 year, 8 months ago by
.
-
Posts
-
Hi all,
sorry if it’s been asked before but I’m struggling. My lamona integrated washer keeps leaking into the reservoir at the bottom, obviously this sets the flood switch and E01 error then occurs.
is this because my dishwasher won’t pump the water out? Is there too much water? How do I resolve the problem?
I have checked the waste hose etc and all is clear and clean with no obvious signs of where water could come from.
videos below
https://youtube.com/shorts/DEfuh57yB2Q?si=z_Cx6KNDyouTj2NO
https://youtube.com/shorts/_9u8-9lTsrs?si=j22016j80bXPQOgC
thanks
difficult to see from the video but it seems to be coming from around the water softner
had a few rust through the stailess tub round or under the nut securing the softner unit
check when it leaks and see if the is water on top of the softner which then drips down
Dave
you have the salt cap inside the machine and a big plastic bottle under the floor at that point. you need to look at the bottle and see if its wet on the top. you could remove the left side to see better
Dave
- You must be logged in to reply to this topic.