beko dphy9p46w No Heat

Home › Forums › Public Support Forums › Help And Support › Tumble Dryer Help Forum › beko dphy9p46w No Heat

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • September 10, 2024 at 4:53 am #102961
    Sparkydude
    Participant

    Morning all , Have one of the above dryers which no longer wants to heat up. I have Had back off and tested the thermostat for continuity and also the NTC adjacent, both reading continuity. but no power seems to be getting to the element. Wondering if its likely to be the NTC at the front is the culprit ?

    She did say last time she used it no condensate was formed in the reservoir , but im assuming if no heat then obviously no condensate would form ??

    All help welcome
    Thanks

    Nick

    September 10, 2024 at 6:05 am #491236
    matrixresonator
    Participant

    Check the water reservoir isn’t full. if it is it will activate a float switch which kills power to the heater.

    September 10, 2024 at 9:11 am #491237
    electrofix
    Moderator

    that model no comes up as a heat pump dryer so has no element

    Dave

    September 11, 2024 at 5:20 am #491238
    Sparkydude
    Participant

    definitely has a heater on the back, with the ntc and reset button on the overheat stat next to it

    September 11, 2024 at 8:29 am #491239
    electrofix
    Moderator

    well Belo think it a heat pump

    do you want to check model and the product code see in pic below

    also see Beko describes it as H pump dryer so no heater

    something wrong somewhere

    Dave

    September 11, 2024 at 10:13 pm #491240
    electrofix
    Moderator

    ok checked again and Beko have made a mistake

    its listed as heat pump all the tech is for heat pump but the parts list is correct for a heater model

    Dave

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.