beko dphy9p46w No Heat

[Sparkydude]

Morning all , Have one of the above dryers which no longer wants to heat up. I have Had back off and tested the thermostat for continuity and also the NTC adjacent, both reading continuity. but no power seems to be getting to the element. Wondering if its likely to be the NTC at the front is the culprit ?

She did say last time she used it no condensate was formed in the reservoir , but im assuming if no heat then obviously no condensate would form ??

All help welcome
Thanks

Nick

[matrixresonator]

Check the water reservoir isn’t full. if it is it will activate a float switch which kills power to the heater.

[electrofix]

that model no comes up as a heat pump dryer so has no element

Dave

[Sparkydude]

definitely has a heater on the back, with the ntc and reset button on the overheat stat next to it

[electrofix]

well Belo think it a heat pump

do you want to check model and the product code see in pic below

also see Beko describes it as H pump dryer so no heater

something wrong somewhere

Dave

[electrofix]

ok checked again and Beko have made a mistake

its listed as heat pump all the tech is for heat pump but the parts list is correct for a heater model

Dave

[Author]

Posts