- This topic has 4 replies, 5 voices, and was last updated 1 year, 4 months ago by
.
-
Posts
-
Hi, The machine starts its spin cycle, turning the drum a little then stops with this error code. Can anyone point me in the right direction to fix this? I’m thinking that it can’t detect that the motor is turning.
Thankswell you could check that
at the back of all washer motors is a little magnet that revolves in a coil known as the tacho
you can get a multi meter and check the tacho coil for continuity and check the magnet is revolving with the armature and not broken
if ok you can check wiring from the tacho back to the board to make sure the signal is getting there
Dave
Three totally different ISE 5 machines made by Beko, Vestel and Amica. The Beko and Amica had brush gear motors whilst the Vestel used a 3 phase motor. What is the model number on the facia? The Beko and Amica did occasionally have tacho wiring related problems. Worth checking the motor brushes if it is either of those two. I’m guessing it will be either Vestel or Amica as the Beko did not have a digital display.
iadom wrote:Three totally different ISE 5 machines made by Beko, Vestel and Amica. The Beko and Amica had brush gear motors whilst the Vestel used a 3 phase motor. What is the model number on the facia? The Beko and Amica did occasionally have tacho wiring related problems. Worth checking the motor brushes if it is either of those two. I’m guessing it will be either Vestel or Amica as the Beko did not have a digital display.
You are right, I checked it. Thank you for making it easy.
- You must be logged in to reply to this topic.