- This topic has 6 replies, 3 voices, and was last updated 10 months ago by
.
Viewing 7 posts - 1 through 7 (of 7 total)
-
Posts
-
E03 officially means the machine has difficulty draining, but can alao appear if the heater element is shorting out
Thanks Stratford girl for your reply if element was shorting out would fuse not blow or electric trip out fasetester
no
fastest way to find outdisconnect element and run a rinse
if ok change heater
get this fault a lot on various machines. heater has slight earth fault but not enough to blow trip but just enough to upset the electronics
Dave
Depends on whether the circuit is RCD protected – older installations are often not. In my experience, it can be triggered by the heater coming loose and hitting the drum on spin
Viewing 7 posts - 1 through 7 (of 7 total)
- You must be logged in to reply to this topic.