Bosch dryer WTA79200GB/04

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch dryer WTA79200GB/04

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • July 13, 2025 at 2:41 pm #103465
    suedehead1
    Participant

    Hi the dryer runs for a couple of minutes, heats and turns then goes to end with the clothes still wet, I replaced the sensor/ntc on the element
    but its made no difference. its vented no blockages, any ideas welcomed

    July 13, 2025 at 4:04 pm #493275
    electrofix
    Moderator

    have you cleaned the moisture detector inside ?

    if it has a timed programme does that run ?

    Dave

    July 13, 2025 at 5:23 pm #493276
    simonb
    Participant

    Like Dave says, give the Electrode a good wipe, for the cost we usually send an engineer with a new electrode part number 10000304 less than £10

    July 15, 2025 at 6:18 am #493277
    suedehead1
    Participant

    I didnt know there was an electrode i will give it a try thanks guys

    July 15, 2025 at 8:39 am #493278
    electrofix
    Moderator

    will be a metal strip just inside the door at the front

    Dave

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.