- This topic has 1 reply, 2 voices, and was last updated 7 months, 2 weeks ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Dishwasher fills with water then seems to cut, I replaced the drain pump approx 2 years ago and have checked the inlet solenoid and motor with multimeter and both are well in range. Circulation pump is attached to motor but when I removed it I could spin the pump with my finger, no obstruction or blockage.
After this cycle thing happens it attempts to fill with water again for another 10 or so seconds.
There’s an approx 90 second video here of how the cycle goes before cutting if that helps https://streamable.com/ini1u9
Any advice would be great, thanks!
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.