Zanussi Aqua 1250 intermittent spin

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Zanussi Aqua 1250 intermittent spin

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • June 26, 2005 at 8:41 pm #10357
    admin
    Keymaster

    😕 Machine drains OK but refuses to spin. Tried assisting the drum with the lid off to no avail. Whats odd, if I lay machine on its side and stand it up again, it seems to be OK for a couple of washes.

    June 26, 2005 at 9:03 pm #139620
    Penguin45
    Participant

    Re: Zanussi Aqua 1250 intermittent spin

    Probably to do with sludge in the water level control system. Am unable to advise more accurately without the model number. Please don’t try and push start the motor – you may well lose your fingers.

    Regards,
    Penguin45.

    June 27, 2005 at 3:38 pm #139621
    admin
    Keymaster

    Re: Zanussi Aqua 1250 intermittent spin

    Aqua 1250

    June 27, 2005 at 3:54 pm #139622
    Dave_Conway
    Participant

    Re: Zanussi Aqua 1250 intermittent spin

    Aqua 1250 isn’t the model number I’m afraid.

    Check inside the door on the rating plate 😉

    Dave.

    June 27, 2005 at 5:39 pm #139623
    admin
    Keymaster

    Re: Zanussi Aqua 1250 intermittent spin

    FLS 1383W

    June 28, 2005 at 8:58 pm #139624
    Penguin45
    Participant

    Re: Zanussi Aqua 1250 intermittent spin

    Thanks. This machine uses two separate water level (or pressure) switches, which are operated by the displacement of air. One is fed from an air chamber mounted on the side of the tub to filter box hose, the other from a chamber on the top of the filter box itself. Either or both are prone to choking with debris thus restricting the air flow. They will probably need stripping and thoroughly cleaning.

    Power off if you’re going to have a go yourself. :plug:

    Regards,
    Penguin45.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.