Indesit slimline dishwasher

Home › Forums › Trade Technical & Spare Parts Forums › Indesit slimline dishwasher

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • October 20, 2025 at 5:44 pm #103620
    SWERV
    Participant

    Hi all,

    I need some clarification on an error code please for an Indesit DSIE2B10UK.
    The start light is blinking continuously and the 1st and 3rd program lights are illuminated (there are 5 program lights). Is this a pressure switch fault?
    The machine fills for about a minute and then it drains out and the drain pump continuously runs.

    Thanks
    Merv

    October 20, 2025 at 7:27 pm #493978
    electrofix
    Moderator

    1, 3 is a pressure switch fault
    but
    what worries me is the start light. A lot of codes use start light as 4th lamp . that would make it 1,3,4 which is dead board

    all you can do is check pressure sw for blockages. also check wires at bottom of door just in case

    Dave

    October 20, 2025 at 7:39 pm #493979
    SWERV
    Participant

    Thanks Dave.
    The start light is on the far left and then it is the programme lights 1 and 3 from left to right.

    Merv

    October 21, 2025 at 9:21 pm #493980
    Hollytree_Technical
    Participant

    Its usually only the steady lights that are used for the error code so in this case I suspect that it will be a gunged up pressure chamber (it seems to be becoming far more common for some reason).

    Jem

    October 22, 2025 at 8:02 am #493981
    SWERV
    Participant

    Thanks Jem.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.