- This topic has 2 replies, 3 voices, and was last updated 20 years, 9 months ago by
.
Viewing 3 posts - 1 through 3 (of 3 total)
-
Posts
-
🙁 Just obtained a CL767 from a friend and it worked for all of 10 seconds and cut off. I have not been able to get it started since. I have checked the filter, water bottle & condenser all look clean and ready to go. Any ideas what this could be?
Re: White Knight CL767
If it’s dead dead, having checked the fuse (?), I would look at the door. There is a striker peg on the door which works a switch in the dryer. This acts as a master switch for the whole machine. Over time, heat can distort the peg, so it doesn’t always work the switch. Also, if the door hinge breaks, the door may not sit as it should – again the door won’t work the switch.
Start there and see how you go. Power off if you go inside……. :plug:
Regards,
Penguin45.
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.