wma bearing kits

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › wma bearing kits

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • July 6, 2005 at 11:57 am #10552
    streetlighter
    Participant

    Hi all
    I dont know if its been mentioned before but I have just recieved a wma spider & bearing kit from seme £26.73+ which has a spider, a bearing kit with a new type of seal ( no poxy spring ) and also the fun bit for me 6 spider bolts 😯 .
    hpt 1604770 if any one is interested.
    Unfortunatly I also wasted £10 on 6 bolts at the same time 🙁

    Paul

    July 6, 2005 at 2:10 pm #140576
    iadom
    Moderator

    Re: wma bearing kits

    Its called a ‘Premier Bearing Kit’ 😆
    been available for a while, the seal is a Rubena seal and does seem to be more reliable, time will tell. 😉
    Part number of complete bearing kit is 1604473

    Strangely enough, I fitted a complete drum assy yesterday, that came with the heater in a bag with the two plastic suspension doofers and six spider torx bolts.??

    July 6, 2005 at 2:36 pm #140577
    Goatboy
    Participant

    Re: wma bearing kits

    iadom wrote:…with the two plastic suspension doofers…

    The Hotpoint engineers have a giant, ‘T’ shaped, cork-screw, tool thingy.

    They use that thing to screw into the old doofers, rid ’em out, and just throw them away, and use the new ones.

    Wasteful eh? But I bet it saves alot of time.

    July 6, 2005 at 2:48 pm #140578
    Martin
    Participant

    Re: wma bearing kits

    Goatboy wrote:The Hotpoint engineers have a giant, ‘T’ shaped, cork-screw, tool thingy.

    Part No: 5600198 (about £25)

    July 6, 2005 at 3:21 pm #140579
    iadom
    Moderator

    Re: wma bearing kits

    Goatboy wrote:

    The Hotpoint engineers have a giant, ‘T’ shaped, cork-screw, tool thingy.

    Insert smutty inuendo here “……………….. ” 😀

    Personally I grip them tight with my mole grips, depress the small lug then tap them out with a small hammer to start, then pull out with the grips.

    July 7, 2005 at 1:24 pm #140580
    Lofthouse
    Participant

    Re: wma bearing kits

    Spider & Bearings on special offer at the moment £19.20

    Best regards

    Webmaster
    http://www.homespare.com

    July 7, 2005 at 4:53 pm #140581
    Phidom
    Participant

    Re: wma bearing kits

    You can use a 13mm ring spanner on the back end of the suspension pegs to depress the lug.

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.