zanussi fl1085

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › zanussi fl1085

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • July 16, 2005 at 11:04 am #10712
    admin
    Keymaster

    help I have a fl1085, when in wash mode it seems to spin and send out a lot of water from the powder drawer can anyone help

    July 16, 2005 at 11:15 am #141596
    Pat-UK
    Participant

    Re: zanussi fl1085

    Hi

    First thing First PULL OUT THE MAINS PLUG.


    Then if you can lean the machine back a little (get someone to hold it if poss) and have a look underneath at the motor, There should be a small magnet fixed firmly to the center of the spindle by a plastic screw.

    These often become loose and either fall off or come to far out to work properly, You should be able to screw it back into place and that should sort out your problem,

    While your there, make sure the Tacho coil is pushed firmly back in place with the little spring clip thingy in place.

    If the thread is damaged on the magnet (will not do back up and just keeps turnng round) a repair kit is available from Dave click on the spares section and send a message from there

    Hope this helps

    Pat

    July 16, 2005 at 11:45 am #141597
    admin
    Keymaster

    Re: zanussi fl1085

    Pat your an absolute star, done what you said and it works a treat now.
    Many thanks you’ve saved me £350, we nearly brought a new one last night.
    Cheers

    Wayne

    July 16, 2005 at 11:53 am #141598
    Pat-UK
    Participant

    Re: zanussi fl1085

    No problem.

    That’s what we’re all here for.

    Glad it all worked out OK.

    🙂

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.