- This topic has 7 replies, 5 voices, and was last updated 20 years, 8 months ago by
.
-
Posts
-
Short story belt broke, ordered new belt, Bag belt is in lists my machine as using the said belt. Checked length, grooves etc against new belt, all is good.
But….. 😥
Took the top of machine, dropped belt down over pully wheel at back of drum, to find that the belt is about 1 inch (2.5cm) away from the drive of the motor. No amount of pulling etc will allow me to get that belt over the motor.
Thought I would undo the bolts holding the motor in place and maybe that would give me enough purchase to get the belt on? Nope still cant even get the belt to touch the drive spindle.
At this point I figured that there must be a well known ‘trick’ to getting these belts on. So tried the old bike chain method of putting the bet around the motor drive and feeding it onto drum and rotating drum to hopefully pull the belt on, but alas all it did was slip and wouldnt go on.
Desperately seeking help here!!
Regards
Mr No Hair.
Re: Fitting a drive Belt to Hotpoint washing machine
HI
Whats the Model number of machine And the part number of the belt you have So that we can check
Mike
Re: Fitting a drive Belt to Hotpoint washing machine
At work just now, will get both sets of information added to post when I get home. Was hoping it was a common problem and i was just doing something wrong 🙁
Regards
Mr No Hair
Re: Fitting a drive Belt to Hotpoint washing machine
Thread the belt around the motor pulley and lash the other end to the main drum pulley using a plastic bag tie to hold it in place and to prevent it slipping off as you turn the drum by hand.
Once the belt rotates over the main pulley, simply cut the bag tie off and away you go 😀
Hotpoint engineers use a special tool (large tubular bar) that stretches the belt over the motor pulley. 😉
Re: Fitting a drive Belt to Hotpoint washing machine
Sounds like a plan, thanx very much I will try and implement over the weekend and post my results.
Much appreciate the help here
Regards
Mr Hope of Hair growth
Bill
Re: Fitting a drive Belt to Hotpoint washing machine
EnofTether ReInspired wrote:Mr Hope of Hair growth
Live with it dont fight it :rotfl:
Re: Fitting a drive Belt to Hotpoint washing machine
Yes, Hotpoint have gradually gone from having the easiest belt fitting access/design on the 95 series made in the ’80s to one of the most difficult, on the WMA machines.
- You must be logged in to reply to this topic.