PRIMA LPR600

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › PRIMA LPR600

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • August 8, 2005 at 8:00 am #11162
    machineman
    Participant

    Hi guys prod number 854560015810 this m/c just pumps and beeps no matter what prog you put it on, it goes back to the first prog and beeps. checked for flood switch ,it hasnt got one. any suggestions would be helpfull.m

    August 8, 2005 at 8:12 am #144188
    goosegreen
    Participant

    Re: PRIMA LPR600

    Machineman had the same problem last mth on exactly the same model after asking for advise on the forum it turned out to be the NTC was O/C
    Goosegreen

    August 8, 2005 at 8:47 am #144189
    Dave_Conway
    Participant

    Re: PRIMA LPR600

    It’s this thread m:

    http://www.ukwhitegoods.co.uk/modules.p … pic&t=6730

    Dave.

    August 8, 2005 at 8:57 am #144190
    goosegreen
    Participant

    Re: PRIMA LPR600

    I would have done that Dave but not sure how to link to the thread

    August 8, 2005 at 7:33 pm #144191
    DentedPorsche
    Participant

    Re: PRIMA LPR600

    Count the flashes on the start button. Single flash is NTC.
    It’s a whirlpool machine, rest of the codes are posted.

    Brian

    August 8, 2005 at 8:28 pm #144192
    machineman
    Participant

    thanks guys will have a look again, flashes continually dp .m

    August 9, 2005 at 5:19 am #144193
    DentedPorsche
    Participant

    Re: PRIMA LPR600

    That’s most likely a single flash, new ntc should cure it.

    Brian

    August 9, 2005 at 7:40 am #144194
    machineman
    Participant

    is this a standard whirlpool ntc.m

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.