late service module

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › late service module

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • August 12, 2005 at 9:11 pm #11289
    simonb
    Participant

    hello all

    took away service module off late type machines module located at top of machine has minisel 546039600-01 ,no motor action fault(dead) brushes ok machine less than 2 years old i noticed back at base on track side a dry joint located under main three relays, i know on other merloni boards blob of solder normally does the trick, couldent try it as only realised missing when took it away before i order another board anyone come across this, is it a componant failure or solder come away, also very slight blackish burn mark with the dry joint??

    simonb

    August 12, 2005 at 9:25 pm #144668
    Penguin45
    Participant

    Re: late service module

    Probably the forward/reverse relay Simon. Reinforce the joint with some single strand wire and resolder. Should be OK…….. Failing that EMW do them at a very reasonable rate.

    Chris.

    August 12, 2005 at 10:14 pm #144669
    simonb
    Participant

    Re: late service module

    thanks chris think ill give it a try

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.