Diplomat ADP 8342 dishwasher

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Diplomat ADP 8342 dishwasher

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • August 13, 2005 at 12:17 pm #11299
    little_benson
    Participant

    Hi, we’ve had an integrated Diplomat ADP 8342 dishwasher for three or four months and yesterday its stopped working with no warning.

    The power light comes on but there are no warning lights or audable alarms. If I switch the power off, select a program then switch it on, it refuses to start a program. I’ve tried switching it off at the mains for a bit but still no joy.

    We have an engineer booked but wondered if I ws doing something daft ?

    B

    August 13, 2005 at 12:38 pm #144710
    Dave_Conway
    Participant

    Re: Diplomat ADP 8342 dishwasher

    Keep the engineer booked, there is a fault I think, either the door latch isn’t working or the PCB control unit is not accepting commands.

    Let us know the outcome please 🙂

    Dave.

    August 19, 2005 at 12:45 pm #144711
    little_benson
    Participant

    Re: Diplomat ADP 8342 dishwasher

    Hi folks,

    Engineer has been and gone. Apparantly the manufacturer has recently learnt that the Diplomat ADP 8342 dishwasher is not suitable for use with dishwasher tablets and should be used with powder/liquid and rinser only. It appears the tablets cause froth which doesn’t rinse away properly and activates the flood prevention mechanism.

    Also, we were running with an old PCB revision which he replaced free of charge.

    No more manual washing up for us !

    B

    August 19, 2005 at 4:01 pm #144712
    NWAR
    Moderator

    Re: Diplomat ADP 8342 dishwasher

    In this instance there should have been an error code displayed by the lights. Normally for this fault you would have the first three lights all flashing together.
    I realise that this information won’t help you any, but it will make me feel slightly better for having posted 🙄

    Craig

    August 19, 2005 at 7:38 pm #144713
    little_benson
    Participant

    Re: Diplomat ADP 8342 dishwasher

    Nope, no error message and the engineer said it wouldn’t necessarily cause one.

    August 23, 2005 at 11:12 am #144714
    admin
    Keymaster

    Re: Diplomat ADP 8342 dishwasher

    In this instance there should have been an error code displayed by the lights. Normally for this fault you would have the first three lights all flashing together

    I have this code coming up with my dishwasher, how do I go about fixing it please?

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.