- This topic has 4 replies, 3 voices, and was last updated 20 years, 7 months ago by
.
-
Posts
-
Hi, my smart drive 501 is working fine but the 5 washing LEDs keep flashing all the time. anyone knows what is going on? i am thinking to upgrade to a larger machine but can’t sell this one because people think there is something wrong here. PLEASE HELP.
Re: Flashing LEDs on F&P Smart Drive 501
Turn machine OFF on the front panel. Hold down the Water Temp Down button and press the POWER button. Release buttons. You are in Diagnostic mode. Press advance once, press the spin speed up button until the hold and slow are lit. Write down the LEDS which are lit across the top row of progress LEDS. and post back. 😉
Re: Flashing LEDs on F&P Smart Drive 501
none of LEDs lit under diag mode, but after pressing POWER to exit diag mode, they are flashing again. thanks KIWI.
Re: Flashing LEDs on F&P Smart Drive 501
The WM is in ‘auto restart off’ mode, probably due to corrosion on the display board. I am assuming that you have tried turning it off at the wall, and leaving it for a minute.
Not a big problem, but shows that one or both of the board circuits has corrosion, and will lead to more problems. 🙁
- You must be logged in to reply to this topic.