- This topic has 3 replies, 2 voices, and was last updated 20 years, 8 months ago by
.
-
Posts
-
😆
Please help me. I have a Whirlpool double oven (Built in). The top door continually drops by about quarter of an inch and has done for the last year. It then catches on the bottom oven door. It is only 2 years old.
It appears to be the hinges. I can take the door off and play about with the area the hinges go into and it is ok for a while, then drops again.
Any good advice please?
regards
DavidRe: Whirlpool double oven door hinges
It sounds like you need a pair of hinges and hinge supports.
Please post the model number and I can check further for you, it will be around the door somewhere.
Dave.
Re: Whirlpool double oven door hinges
Thank you for your reply. Please note, the oven is only 2 years old.
The Model Number is AKP950 1X
regards
farneholmRe: Whirlpool double oven door hinges
OK, if you remove the door then check the two screws each side that go into the hinge supports, one may be very loose or even missing or one of the hinges could be worn, although as you say it’s not that old and only the smaller door, it’s normally the large door due to the weight.
Here’s the info if you need it:
Door Hinges 4812 417 18864 – £18.46 each
Door hinge support L/H – 4812 417 18863 – £12.83
Door hinge support R/H – 4812 417 18862 – £16.41
Postage £3.95, all inc VAT.Let me know if you need any of it spares@ukwhitegoods.co.uk 🙂
Dave.
- You must be logged in to reply to this topic.