Indesit door has come off how do I put it back on

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Indesit door has come off how do I put it back on

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • August 22, 2005 at 12:26 pm #11478
    admin
    Keymaster

    indesit model F1 E10 duel fuel cooker

    The door just popped of and I cant find a way to put it back on?

    Can anyone help please?

    Thanks in advance

    August 22, 2005 at 12:55 pm #145492
    Dave_Conway
    Participant

    Re: Indesit door has come off how do I put it back on

    There’s a “sticky” at the top of this forum that should help titled ” Removing oven door for cleaning” 🙂

    Dave.

    August 22, 2005 at 6:58 pm #145493
    admin
    Keymaster

    Re: Indesit door has come off how do I put it back on

    I looked at them but the door aint the same, so its no good any more ideas?

    August 22, 2005 at 7:26 pm #145494
    Martin
    Participant

    Re: Indesit door has come off how do I put it back on

    Anonymous wrote:I looked at them but the door aint the same, so its no good any more ideas?

    We appreciate it isn’t the same but the principle is on those makes that allow full removal of the main oven door!

    Are you saying that the door is broken? or has it simply got un-hooked from its removable fixing?

    August 23, 2005 at 9:36 am #145495
    admin
    Keymaster

    Re: Indesit door has come off how do I put it back on

    The door hinge looks like this,i am havind difficulty putting all hinges into the framework of cooker

    No it is not broken,just come apart lol

    Is there a nack,i can get bottom hinges in ok or the top ones but not both at same time!

    Thanks

    August 23, 2005 at 11:13 am #145496
    Dave_Conway
    Participant

    Re: Indesit door has come off how do I put it back on

    OK, put the hinge(s) back on the door then follow the instructions in the video, they are all much the same as Martin suggests.

    Basically, you need to “lock” the hinges in the fully open position before putting back on to the cooker frame.

    Dave.

    August 30, 2005 at 5:18 pm #145497
    admin
    Keymaster

    Re: Indesit door has come off how do I put it back on

    Thanks..
    But there isn’t a way to lock the hinges,there is nothing but a basic hinge with no locking capabilities,they just flap aroud?

    😥

    August 30, 2005 at 6:13 pm #145498
    Penguin45
    Participant

    Re: Indesit door has come off how do I put it back on

    Choochoo is quite right. The hinges are p/no C00031025 (There’s a lovely picture for Connect users) and there is no locking mechanism. I presume that the only way to do this is to manually overcome the spring on the upper arm by inserting them into the guides and levering the door down, whilst an extra pair of hands steers the bottom mounts into place.

    Truly, a design masterpiece.
    Good luck,
    Penguin45.

    August 31, 2005 at 11:57 am #145499
    admin
    Keymaster

    Re: Indesit door has come off how do I put it back on

    Thanks a lot for helping,I’ve done it at last!!

    What I did was to take the hinges out of the door as 2 seperate pieces,then struggle like a twat for half an hour on each hinge 👿 ,until they went in and were moving up and down normally.

    Then I rebuilt the door around the hinges having to cut two slots in the bottom of the door to get it over the hinge assembly.

    😆 😆 😆

    😉

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.