Bosch WFL 2000 Washing m/c

Home Forums Public Support Forums Help And Support Washing Machine Help Forum Bosch WFL 2000 Washing m/c

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #11629
    admin
    Keymaster

    Problem: Machine occasionally will complete the cycle but invariably just continues to wash until it is stopped and the spin cycle is sellected.

    Any quick fixes?

    Thanks

    #146063
    Del
    Moderator

    Re: Bosch WFL 2000 Washing m/c

    First things first, have you gone through the trouble shooter guide in your instruction booklet for the machine ? i.e. checked for blocked filters, kinked hoses, water supply etc.

    If so how long does it stay on for on say a colourfast 40 degree, wash as these machine do have long wash times.

    Have you tried doing a maintinance wash at 90 degrees with the machine empty and a small amount of detergent to desludge the machine.

    TRY these first

    HTH

    Del

    #146064
    superfix
    Participant

    Re: Bosch WFL 2000 Washing m/c

    Sounds like you have selected “rinse hold” program to me.

    #146065
    admin
    Keymaster

    Re: Bosch WFL 2000 Washing m/c

    Del wrote:First things first, have you gone through the trouble shooter guide in your instruction booklet for the machine ? i.e. checked for blocked filters, kinked hoses, water supply etc.

    If so how long does it stay on for on say a colourfast 40 degree, wash as these machine do have long wash times.

    Have you tried doing a maintinance wash at 90 degrees with the machine empty and a small amount of detergent to desludge the machine.

    TRY these first

    HTH

    Del
    Afraid no manual available. Have checked all the obvious filters, H&C inlet (both ends) and main pump inlet, all clear.

    40 degree wash would normally take approx 45 mins. Occasionally this works but we have had it running for hours without going into the rince/spin cycle. We have resorted to timing the wash period, stopping it and sellecting rince, it then completes the wask OK. The ‘rince hold’ button been tried and the acknowledge light switches on and off and has not been sellected.

    We have done a 90 degree wash with a proprioty descaling compound with no apparent change.

    Anything else we can try?

    Thanks

    #146066
    Goatboy
    Participant

    Re: Bosch WFL 2000 Washing m/c

    Is it getting to the rinses, or sticking on wash?

    What is it doing for hours when it sticks?

    #146067
    admin
    Keymaster

    Re: Bosch WFL 2000 Washing m/c

    Goatboy wrote:Is it getting to the rinses, or sticking on wash?

    What is it doing for hours when it sticks?

    Machine appears to be stuck on the wash cycle and rotates/counter-rotates for as long as we let it?

    #146068
    Martin
    Participant

    Re: Bosch WFL 2000 Washing m/c

    The heating element has failed I expect and possibly the water level sensor needs attention?

    Get a local engineer in to check it out, save all the bother and worry after all, try: Repairs@

Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.