- This topic has 4 replies, 3 voices, and was last updated 20 years, 7 months ago by
.
-
Posts
-
My Zanussi WDJ1285 washer / dryer won’t stop filling with water. It fills until water floods out of the soap drawer. I have cleaned the drawer & filter. Is there a level switch somewhere that I can check ? What tells it when to stop filling ? Thanks.
Re: Zanussi washer won’t stop filling
There is a level control switch which is fed from a chamber on the filter manifold – probably the air chamber is blocked which can be quite fiddly to clean and in some cases it’s easier to change the whole manifold unit which is not expensive.
If youre going to have a go yourself make sure you pull the plug first, alternatively have a look in the repairs@ section to see if there’s someone in your area as this can be a fiddly job.
Re: Zanussi washer won’t stop filling
Thanks farmboy. I will have a go myself, seeing as I completely dismantled the thing recently to change the bearings ! Can you give me a clue what / where I am looking for please ? Many thanks.
Re: Zanussi washer won’t stop filling
He’s talking about the box section attached to the filter. Check the skinny hoses running up to the level switches before performing the demolition job. They may be chaffed through.
Power off before attempting anything.
Regards,
Penguin45.
- You must be logged in to reply to this topic.