whirlpool adp5966 error code f1

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › whirlpool adp5966 error code f1

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • September 12, 2005 at 9:53 pm #11942
    egroeg
    Participant

    adp 5966 on switch on on/off light flashes, f1 lights pump runs then stops and left with f1 error code, no fill. Whirlpool site no help. Valves, pipes ok so is fllod device. Can any wise guru please assist and point me in the right direction or have any idea as to the meaning of the f1 code . Many thanks for any info.
    egroeg

    September 12, 2005 at 11:26 pm #147253
    Penguin45
    Participant

    Re: whirlpool adp5966 error code f1

    F1 is a failure in the temperature sensing circuit. Either the sensor, associated wiring or the electronics have failed.

    Tricky one to get right, check repairs@ or Directories for a UKW repairer in your area.

    Power off if you wish to investigate further.

    Regards,
    Penguin45.

    October 23, 2005 at 7:18 pm #147254
    egroeg
    Participant

    Re: whirlpool adp5966 error code f1

    Sorry for delay in answer but have been away due to bereavement in the family but many many thanks for your help the problem was due to a faulty thermistor.
    So well done you and again many many thanks
    egroeg

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.