INDESIT EVOLUTION

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › INDESIT EVOLUTION

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • September 21, 2005 at 8:53 pm #12104
    razor
    Participant

    Got error code F12 , a know this means LCD Display module and main module not communicating correctly

    anybody help in what am looking for thats causing the fault .
    Is it the lcd thats faulty or module or can it be wiring

    thanks all 🙂

    September 21, 2005 at 9:05 pm #147906
    Dave_Conway
    Participant

    Re: INDESIT EVOLUTION

    Poor connections on the edge connectors normally razor 🙂

    Dave.

    September 22, 2005 at 3:26 am #147907
    andy2
    Participant

    Re: INDESIT EVOLUTION

    Yep, Daves blob on.

    Easiest – try slipping the connectors on and off a few times, failing that –

    carefully clean up the tracks at both ends and re-spring the idc connector pins with a small needle to tighten the fit.

    If this does not work then you may have a dodgy eeprom (corrupted data) on the display module.

    They should have renamed the eeprom’s on these machines MMMD’s

    (Merloni money making device)

    Andy

    September 23, 2005 at 6:47 pm #147908
    Tony_EMW
    Participant

    Re: INDESIT EVOLUTION

    We diagnose & reprogram these Evolution parts. Send the main board & display for test/repair same day. F12 often means memory messed up both on the board AND display
    Tony
    http://www.emwelec.co.uk

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.