Zanussi does not fill

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Zanussi does not fill

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • September 28, 2005 at 6:42 pm #12237
    dale_s
    Participant

    We have a Zanussi dishwasher PN 911841017/01, Model 8814X vintage mid-late 2002 built-in model. It came with our rented home in Germany and occasionally does not fill at the beginning of the wash cycle. Have perused the forums here without finding a precise problem/solution. So far, the fix is to turn off (without disconnecting the electrical mains) the dishwasher, shut off the water supply to the inlet hose below the sink, briefly loosen (but not disconnect) and re-tighten the dishwasher inlet hose, and turn the water back on again. Some sort of pressure/vacuum problem? Any ideas?

    September 28, 2005 at 6:49 pm #148634
    Penguin45
    Participant

    Re: Zanussi does not fill

    Have a read of this:

    http://www.ukwhitegoods.co.uk/modules.p … ge&pid=104

    Outlines the usual problem.

    Regards,
    Penguin45.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.