Whirlpool ADP 4500WH Dishwasher

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirlpool ADP 4500WH Dishwasher

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • September 29, 2005 at 8:34 pm #12274
    cornwell40
    Participant

    This machine is starting the programme (ie pumps out) for about three minutes then stops dead. Checked heater, valve, motor all ok. I’m thinking board but not come across this model before. I was convinced before I got there it would be a flood switch tripped but it doesn’t have one 😳

    Any ideas???

    Tony C

    September 29, 2005 at 9:10 pm #148811
    Dave_Conway
    Participant

    Re: Whirlpool ADP 4500WH Dishwasher

    On the earlier “Dolphin” dishwashers this used to be caused by the three lead connector between the PCB and sump (pressure) switch getting wet.

    Looking at the diagram though, I can’t see the usual lower PCB, is it just the main user board in the door on this one Tony ?

    Dave.

    September 29, 2005 at 11:40 pm #148812
    cornwell40
    Participant

    Re: Whirlpool ADP 4500WH Dishwasher

    There’s only one board in this model. left hand side of the facia.
    tony C

    October 3, 2005 at 8:22 pm #148813
    cornwell40
    Participant

    Re: Whirlpool ADP 4500WH Dishwasher

    Just thought i’d try again with this one.
    You never know????


    Tony C

    October 3, 2005 at 8:52 pm #148814
    johnmac11
    Participant

    Re: Whirlpool ADP 4500WH Dishwasher

    Check the NTC Tony, at 20 degrees you should get 58.1k and at 25 degrees it should be 47.1k When you get a problem at the start of the program on the Dolphin range it is usualy down to a leak tripping the flood switch or a NTC problem.

    John

    October 4, 2005 at 5:57 am #148815
    DentedPorsche
    Participant

    Re: Whirlpool ADP 4500WH Dishwasher

    Is the start light flashing an error code? If not then my money goes on a faulty module.
    NTC is the most common start up fault followed by the pressure switch and flow meter connections.

    Brian

    October 4, 2005 at 8:09 am #148816
    cornwell40
    Participant

    Re: Whirlpool ADP 4500WH Dishwasher

    😀
    Thanks. I’ll do some checking again!!!
    Whats the price of the board on these, noone has any listings for the model.


    Tony C

    October 4, 2005 at 8:17 am #148817
    Dave_Conway
    Participant

    Re: Whirlpool ADP 4500WH Dishwasher

    Part number 481221848083 at £59.04 ex VAT list Tony 🙂

    Dave.

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.