Zanussi TDS 382W front bearing

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Zanussi TDS 382W front bearing

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • October 10, 2005 at 9:46 am #12475
    Simon46
    Participant

    Have customer with tumble dryer with metal to metal contact on front of drum. What is the part no for the front bearing on PNC 916770544 00 ?

    Regards
    Simon

    October 10, 2005 at 10:24 am #149847
    Dave_Conway
    Participant

    Re: Zanussi TDS 382W front bearing

    Felt pad – 125 00 28-05/5
    Bearing pads – 125 30 05-01/9

    That should be all that’s required by the look of the diagram 🙂

    Dave.

    October 10, 2005 at 12:56 pm #149848
    Simon46
    Participant

    Re: Zanussi TDS 382W front bearing

    How many bearing pads are there Dave?

    S.

    October 10, 2005 at 1:01 pm #149849
    Dave_Conway
    Participant

    Re: Zanussi TDS 382W front bearing

    It only shows one on the diagram Simon but I think there are two on the top from memory but someone may wish to confirm 🙂

    Dave.

    October 10, 2005 at 3:36 pm #149850
    farmboy
    Participant

    Re: Zanussi TDS 382W front bearing

    Erm… I could be being really thick here but i’m sure the TDS382 never had any front bearing pads, just a front gasket. But there was a mod kit for machines that marked clothes which came with a new felt and 2 clip-on pad bearings. used to be 50272165007.

    October 10, 2005 at 3:48 pm #149851
    Dave_Conway
    Participant

    Re: Zanussi TDS 382W front bearing

    Yep, that was the eraly one’s. For this PNC (the later version) it shows the pads on the diagram. It may be cheaper to order the kit though 😀

    Dave.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.