Zanussi TDS 382W front bearing

[Simon46]

Have customer with tumble dryer with metal to metal contact on front of drum. What is the part no for the front bearing on PNC 916770544 00 ?

Regards
Simon

[Dave_Conway]

Re: Zanussi TDS 382W front bearing

Felt pad – 125 00 28-05/5
Bearing pads – 125 30 05-01/9

That should be all that’s required by the look of the diagram 🙂

Dave.

[Simon46]

Re: Zanussi TDS 382W front bearing

How many bearing pads are there Dave?

S.

[Dave_Conway]

Re: Zanussi TDS 382W front bearing

It only shows one on the diagram Simon but I think there are two on the top from memory but someone may wish to confirm 🙂

Dave.

[farmboy]

Re: Zanussi TDS 382W front bearing

Erm… I could be being really thick here but i’m sure the TDS382 never had any front bearing pads, just a front gasket. But there was a mod kit for machines that marked clothes which came with a new felt and 2 clip-on pad bearings. used to be 50272165007.

[Dave_Conway]

Re: Zanussi TDS 382W front bearing

Yep, that was the eraly one’s. For this PNC (the later version) it shows the pads on the diagram. It may be cheaper to order the kit though 😀

Dave.

[Author]

Posts