WM-1465FHD Again! – UK Whitegoods

This topic has 4 replies, 2 voices, and was last updated 20 years, 6 months ago by Ellis.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
October 15, 2005 at 4:14 pm #12593

Ellis
Participant

Hi There

I have an LG WM-1465FHD and the washer has now stopped mid cycle and full of water with an error: OE

I had this error before and the problem was something stopping the blades behind the filter from turning, I have cleared this and there seems to be no blockage.

The only way I can get the washer to keep going is to pull out the black hose and empty all water into that, then the washer spins as normal!!

What can be causing the problem?? ❓

October 15, 2005 at 4:34 pm #150565

Ellis
Participant

Re: WM-1465FHD Again!

It just stopped in the middle of a full wash with a ‘stuck’ kind of noise.

All I did was turn the filter so some water escaped and water seemed to gush through and the spin continued…

I checked the spindle behind the filter and that seemed to be spinning without obstruction, could it still be the problem do you think…?

October 15, 2005 at 6:07 pm #150566

Dave_Conway
Participant

Re: WM-1465FHD Again!

It sounds like something went in to the pump and jammed it.

Check the associated hoses for coins, buttons etc as it may still be floating about in there, power off please :plug:

Dave.

October 15, 2005 at 6:12 pm #150567

Ellis
Participant

Re: WM-1465FHD Again!

Thanks, which hoses will they be? Sorry, theres not much I can see apart from the black hose, do you mean round the back??

😕

Thanks for your reply! 🙂

October 15, 2005 at 6:49 pm #150568

Dave_Conway
Participant

Re: WM-1465FHD Again!

The hoses that attach to the pump other than the emegency drain one 😉

If you’re unsure, then please ask an engineer to attend for you, Repairs@ should provide one 🙂

Dave.
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.