zan wjs 1265w not starting

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › zan wjs 1265w not starting

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • October 24, 2005 at 2:39 pm #12769
    pmb
    Participant

    I have a problem with a zan wjs1265w which is not starting programs. The interlock light always stays on, although the door can be opened. I changed the interlock and it is still the same. You can select a program, press start and it will beep but not do anything. Can anyone help? 😥

    October 24, 2005 at 3:21 pm #151539
    Martin
    Participant

    Re: zan wjs 1265w not starting

    Normally I would be certain the Interlock is at fault? Possibly I would try another? How long after you press ‘Start’ does it beep? ”Cos these machines ‘self check’ before starting and if say the valve or pump was open circuit, it would give an error like this. 😕 Worth a bit of a check around to see I reckon! 😉

    October 25, 2005 at 7:33 am #151540
    pmb
    Participant

    Re: zan wjs 1265w not starting

    Hi that is really helpful, I will check everything. It beeps as you press the button as they normally do. Thanks for your advice 😀

    October 25, 2005 at 10:18 pm #151541
    deltra
    Participant

    Re: zan wjs 1265w not starting

    had one of these doing the same thing 😡 banged around for ages ,could’nt find the fault. eventually i took the leads off the pcb ,reconnected and off it went 😯 (worth a try,2 mins)

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.