- This topic has 5 replies, 5 voices, and was last updated 20 years, 5 months ago by
.
-
Posts
-
I have a 10 year old bosch wfm3030 gb/04. The drum now does not rotate during wash, rinse or spin. I took the motor out and cleaned the armature with meths as it was very sooty worn and rough. Its done a couple of washes ok but stopped again. I`m guessing its the brushes(there`s about 5-10mm left) but I can`t work out how to remove them. Could the armature be too worn anyway?
Re: Bosch wfm3030 brushes?
Official repair was to fit the brush plate with new carbons complete. P/no was 092025, but there is no longer a price listed. Last one I recall was around £45. Dismantling the motor is the only way to fit it.
An email to spares@ukwhitegoods.co.uk may reveal whether loose brushes to fit the brush plate are available.
Power off before dismantling anything.
Regards,
Penguin45.Re: Bosch wfm3030 brushes?
Hya Chris
That old part number now transposes to 096331 @ £30.00GBP.Greg 😉
Re: Bosch wfm3030 brushes?
Not sure where you get that price from Greg but 096331 is listed as £54:64 on the BSH website and I`m not sure if that includes carriage and vat.
Bryan
Re: Bosch wfm3030 brushes?
Or a far more economical option if you don’t mind stripping the motor:
http://www.ukwhitegoods.co.uk/modules.p … cts_id=422 😀
Dave.
- You must be logged in to reply to this topic.