Zanussi Dishwasher DA6141 Power Fault

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Zanussi Dishwasher DA6141 Power Fault

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • October 30, 2005 at 6:50 pm #12936
    escape
    Participant

    I have a Zanussi dishwasher that appears to have just stopped midway through a cycle. The power light does not illuminate when I press in the yellow power button either.
    I have checked the 13Amp fuse in the plug – this is fine – and I have tested the socket by plugging in another device.

    Does anyone know if this type of dishwasher has any internal fuses that I can replace if I open it up.

    Or any other ideas to try.

    Need to get this fixed soon – my hands are beginning to wrinkle!!!

    October 30, 2005 at 9:40 pm #152308
    Dave_Conway
    Participant

    Re: Zanussi Dishwasher DA6141 Power Fault

    It’s possibly the on/off switch but you will need the correct equipment to test is unless it’s obviously visibly failed.

    Power off please if investigating :zap: or try Repairs@ for an engineer if you’re unsure 🙂

    The part is here if it proves to be faulty:

    http://www.ukwhitegoods.co.uk/modules.p … cts_id=305

    Dave.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.