- This topic has 1 reply, 2 voices, and was last updated 20 years, 5 months ago by
.
-
Posts
-
I have a Zanussi dishwasher that appears to have just stopped midway through a cycle. The power light does not illuminate when I press in the yellow power button either.
I have checked the 13Amp fuse in the plug – this is fine – and I have tested the socket by plugging in another device.Does anyone know if this type of dishwasher has any internal fuses that I can replace if I open it up.
Or any other ideas to try.
Need to get this fixed soon – my hands are beginning to wrinkle!!!
Re: Zanussi Dishwasher DA6141 Power Fault
It’s possibly the on/off switch but you will need the correct equipment to test is unless it’s obviously visibly failed.
Power off please if investigating :zap: or try Repairs@ for an engineer if you’re unsure 🙂
The part is here if it proves to be faulty:
http://www.ukwhitegoods.co.uk/modules.p … cts_id=305
Dave.
- You must be logged in to reply to this topic.