Zanussi WJS1397W prod. 914639503/00

This topic has 6 replies, 5 voices, and was last updated 20 years, 5 months ago by wishbone.

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
November 1, 2005 at 6:20 pm #12969

wishbone
Participant

Hi all, have got this zanussi to look at on thursday,
customer says whatever programme you put it on
it fills then just clicks through the cycle quickly.
dont remember having a zanussi doing this before.
has anyone got any idea’s that might help?
thanks in advance
pete….

November 1, 2005 at 6:40 pm #152402

litlor
Participant

Re: Zanussi WJS1397W prod. 914639503/00

check that nothing is down to earth or the most common fault is not draining

November 1, 2005 at 7:58 pm #152403

Tony_EMW
Participant

Re: Zanussi WJS1397W prod. 914639503/00

Most likely cause is the L shaped module Ako 546547. We keep them in stock if you want to try one. Tony EMW

November 2, 2005 at 10:10 am #152404

Mark1
Participant

This will be the timer. one of the internal cogs has jammed allowing the timer motor to engage the whole timer. Mark

November 3, 2005 at 8:43 pm #152405

wishbone
Participant

Re: Zanussi WJS1397W prod. 914639503/00

Thanks for the replys.
looked at it today and the fault was tacho coil
hanging of the motor on its wires and magnet unscrewed.
these refitted cured the problem.
thanks again pete….

November 3, 2005 at 8:46 pm #152406

Simon46
Participant

Re: Zanussi WJS1397W prod. 914639503/00

Those sole motors. What an earner. Great when you say to the customer the motor is faulty…… But it can be repaired for a small fee.

S.

November 3, 2005 at 9:17 pm #152407

wishbone
Participant

Re: Zanussi WJS1397W prod. 914639503/00

yes i was pleased, went expecting prog/module
fault which usually results in customer buying
a new machine…… 😀
Author

Posts

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.