Bosch WFT2800GB/13

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Bosch WFT2800GB/13

Viewing 13 posts - 1 through 13 (of 13 total)
  • Author
    Posts
  • November 18, 2005 at 2:56 pm #13414
    Bryan
    Participant

    Looking for motor end frame and BSH list it as 096805.
    Connect don`t have stock and Masterpart list it along with a few others but you can`t actually order this part no. it just keeps cross referencing to an alternative 😕

    Does anyone know if this part is interchangable with any of the others ❓

    Thanks

    Bryan

    November 18, 2005 at 3:08 pm #154765
    Martin
    Participant

    Re: Bosch WFT2800GB/13

    096331 Motor End Frame is the part no you need Bryan to fit that machine 😉

    November 18, 2005 at 5:23 pm #154766
    Bryan
    Participant

    Re: Bosch WFT2800GB/13

    Thanks for that Martin and I don`t mean to doubt you but I make it 096805 . Has this changed to 096331 or are you 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sure they are equivalent.

    Bryan

    November 18, 2005 at 5:38 pm #154767
    Dave_Conway
    Participant

    Re: Bosch WFT2800GB/13

    Yes, both the same part Bryan 🙂

    Dave

    November 24, 2005 at 12:29 pm #154768
    Bryan
    Participant

    Re: Bosch WFT2800GB/13

    Sorry to bring this up again but I`m in the process of replacing the end cap on this motor and whilst new one will fit (096331) I`m very concerned that the tacho is a different set up.
    On the original end cap the tacho is a 3 terminal device connected at 6 , 7 and 8 on the terminal block but with no resistance readings 😕 and as you know 096331 has 14 odd ohms between terminals 6 and 7.

    Any further thoughts appreciated but I think I`ll be getting my soldering iron out swapping brushes and toc.

    Bryan

    November 24, 2005 at 2:58 pm #154769
    Martin
    Participant

    Re: Bosch WFT2800GB/13

    At the top we have 088421 (no tacho coil) and below that of the 096331 which has a tacho coil fitted in the bottom! Which one do you have there Bryan??

    November 24, 2005 at 4:27 pm #154770
    Bryan
    Participant

    Re: Bosch WFT2800GB/13

    Yes Martin , it looks very much like the top one 088421 but I make the part no. for this machine 096805. Do we agree these are different parts and not interchangeable with 096331 as was suggested above.

    Bryan

    November 24, 2005 at 4:57 pm #154771
    Dave_Conway
    Participant

    Re: Bosch WFT2800GB/13

    Hmm, Bosch themselves don’t supersede 096805 to anything, Masterpart’s site does though to 096331 among various others.

    Wrong info I think 🙁

    Dave.

    November 24, 2005 at 5:04 pm #154772
    Bryan
    Participant

    Re: Bosch WFT2800GB/13

    Yes Dave I was a bit worried you got that information from Masterpert website as some of their equivalents are slightly misleading IMO.
    No big deal , managed to snip and solder the brushes from 096331 into the original end cap but a damned expensive way to do it 🙄

    Cheers anyway and hope this helps for future reference.

    Bryan

    November 24, 2005 at 6:54 pm #154773
    gegsy
    Participant

    Re: Bosch WFT2800GB/13

    Dave_Conway wrote:Hmm, Bosch themselves don’t supersede 096805 to anything, Masterpart’s site does though to 096331 among various others.

    Wrong info I think 🙁

    Dave.

    Tradeplace has no part substitute Dave for 096805 so I would imagine that the part number 096805 is still valid 😕

    Greg

    November 26, 2005 at 12:36 pm #154774
    Bryan
    Participant

    Re: Bosch WFT2800GB/13

    Just to finish off this saga , went back today with new end cap 096805 and all working fine and motor back to original spec.

    Pardon my ignorance can anyone explain how that tacho works , there is a magnet but no coil. That 3 legged device in the end cap is obviously pretty clever.

    Bryan

    November 26, 2005 at 12:50 pm #154775
    Phidom
    Participant

    Re: Bosch WFT2800GB/13

    Bryan wrote:…managed to snip and solder the brushes from 096331 into the original end cap but a damned expensive way to do it 🙄

    Bryan
    Sounds like you have now purchased 2 end caps to change one set of brushes. Now that IS expensive. 😯

    November 26, 2005 at 1:29 pm #154776
    Bryan
    Participant

    Re: Bosch WFT2800GB/13

    I originally quoted the customer for new end cap and that`s exactly what they now have. I now have a spare 096331 and I can solder the brushes back in without any problem.

    Extra work yes but at the end of the day I feel happy with it.

    Now , what about that tacho 🙂

    Bryan

  • Author
    Posts
Viewing 13 posts - 1 through 13 (of 13 total)
  • You must be logged in to reply to this topic.