Miele Inlet/drain fault

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Miele Inlet/drain fault

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 19, 2005 at 9:57 am #13422
    Arnie
    Participant

    Hello,

    I have an Inlet/Drain fault showing on my Miele dishwasher. As far as I can tell, the inlet is not blocked, the drain, filters and pump-chamber are all clean and clear. The dishwasher got stuck in the middle of a fill cycle and the red fault LED is showing and won’t reset.

    What else can I check?? I don’t mind doing some dismantling and I’m used to working on such things.

    Thanks
    A.

    November 19, 2005 at 10:36 am #154809
    Arnie
    Participant

    Re: Miele Inlet/drain fault

    I think I figured it out: Just keep the START button pressed to clear the fault.

    November 19, 2005 at 5:14 pm #154810
    gegsy
    Participant

    Re: Miele Inlet/drain fault

    Symptom and cause.
    Check base for any water that may have activated float. If there is water present you then need to find leak.

    Power off of course :plug:

    Greg[/list]

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.