Miele Inlet/drain fault

[Arnie]

Hello,

I have an Inlet/Drain fault showing on my Miele dishwasher. As far as I can tell, the inlet is not blocked, the drain, filters and pump-chamber are all clean and clear. The dishwasher got stuck in the middle of a fill cycle and the red fault LED is showing and won’t reset.

What else can I check?? I don’t mind doing some dismantling and I’m used to working on such things.

Thanks
A.

[Arnie]

Re: Miele Inlet/drain fault

I think I figured it out: Just keep the START button pressed to clear the fault.

[gegsy]

Re: Miele Inlet/drain fault

Symptom and cause.
Check base for any water that may have activated float. If there is water present you then need to find leak.

Power off of course :plug:

Greg[/list]

[Author]

Posts