Fisher & Paykel – gw708U won’t fill with water

Home › Forums › Public Support Forums › International Forums › Australasian Appliance Forum › Fisher & Paykel – gw708U won’t fill with water

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • November 23, 2005 at 12:14 pm #13519
    russ1001
    Participant

    Hi all,

    My Fisher & Paykel switches on – all settings seem functional – but when I click start nothing happens. Nothing at all. I’ve got thru all the diagnostics and here are the codes, starting with ALL the spin speed lights on:

    00010111
    01001001
    00100100
    00000100 – alternating with 00000011
    11111111
    00001011
    10001001
    00011001 – last LED flashing
    00011111
    00001011
    01110111

    If anyone has the diagnostics sheet handy – please email to:
    seattlecrew2004 @ yahoo.com.au.

    Many thanks…

    November 24, 2005 at 12:44 am #155324
    Penguin45
    Participant

    Re: Fisher & Paykel – gw708U won’t fill with water

    A right hatful. As far as I can work out you have a problem with the water level control system and possibly with the control board. Can’t really be more specific I’m afraid.

    Time for pro help perhaps?

    Regards,
    Penguin45.

    November 24, 2005 at 2:39 am #155325
    russ1001
    Participant

    Re: Fisher & Paykel – gw708U won’t fill with water

    Okay.. thanks muchly for the help!

    Can anyone recommend a repairer in Sydney – Inner West?

    November 24, 2005 at 6:15 am #155326
    KiwiwantsworkinCanada
    Participant

    Re: Fisher & Paykel – gw708U won’t fill with water

    Please post only the light sequence which relates to the hold and spin lights, it make our job so much easier 😀

    November 24, 2005 at 12:52 pm #155327
    FastAndPro
    Participant

    Re: Fisher & Paykel – gw708U won’t fill with water

    could be the lid sensor we need the spin and hold ;ights plus the next one to check the lid switch If you test the balance switch you know your in the right area of test lights

    November 29, 2005 at 10:15 am #155328
    russ1001
    Participant

    Re: Fisher & Paykel – gw708U won’t fill with water

    noticed that the lid switch wasn’t changing any of the lights as I open and closed the lid.. so I’ve temporarily shorted the wires going to the switch.. all working fine now!

    thanks for the help!

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.